本文章最後由 cool2264 於 2014-10-9 14:40 編輯
SCOOTER POWERLE 5W-40
High performance lubricant for 4 stroke
engineoil Scooters
100% Synthetic – Low Emission
TYPE OF USE
High performance motor oil designed to meet today’s 4 stroke engines for powerful and recent
scooters for which manufacturers recommends JASO MB
specification. It provides effective control of
piston deposit, wear and bearing corrosion.
All driving conditions : City road, Highway.
ATTENTION : Not
suitable for 4T motorcycle engine.
PERFORMANCE
STANDARD API SL
APPROVAL JASO MB under N° M065MOT010
100% Synthetic lubricant for improved oil film re
sistance at high temperatures and high revolutions.
JASO MB approval ensure perfect operating conditions when a dry clutch is fitted on the scooter.
The SAE 5W-40 viscosity grade corresponds to most recent manufacturers’ recommendations
and improves engine starts when cold while lowering wear.
Very low volatility to reduce oil consumption. Superior low emission control.
Outstanding engine cleanliness, detergent and dispersives properties.
Maintain oxidation stability and reduce soot accu
mulation. Resistance to corrosion and foaming.
RECOMENDATIONS
Drain interval : according to manufacturers’ recommendations and tune to your own use.
MOTUL Scooter Power LE 5W-40 cannot apply to the system that requires JASO MA specification.
PROPERTIES
Viscosity grade SAE J 300
5W-40
Density at 15°C (59°F) ASTM D1298 0,856
Viscosity at 100°C (212°F) ASTM D445 14.2 mm²/s
Viscosity at 40°C (104°F) ASTM D445 81.1 mm²/s
Viscosity index ASTM D2270 181
Pour point ASTM D97 -33°C / -27°F
Flash point ASTM D92 226°C / 428°F
TBN ASTM D 2896 7.2 mg KOH/g
這是SCOOTER
H TECH好像拿掉了
3100沒看到
但是相較之下 5100是這樣寫
Technosynthese lubricant reinforced by Ester base stock to warranty anti-wear properties and improve
gear protection and life time.
Technosynthese lubricant reinforced by ''Ester base'' stock to warranty anti-wear properties and improve
gear protection and life time.
|
二行程的機車比較明顯吧
