不過是小弟剛好 手頭上有一些資料有相關
就以 一體式雙插銷 X99C4 60/61 這顆為例吧!!
這顆麥可兄 不陌生吧!!
這個卡鉗的加工過程 妳一定也知道
以下是 加工這張圖的一些文字說明 麥可兄應該看得懂
Brembo Monobloc Brake Calipers are CNC-machined from a single block of solid aluminum (unlike a cast or forged caliper), virtually eliminating the chance of air bubbles or other manufacturing defects. Monobloc production also yields virtually no expansion or flex meaning all the braking power is directed to the rotors.
Brembo is the largest brake manufacturer in the world, and spends more on R&D than the gross sales of other aftermarket brake manufactures. These Brembo radial brake master cylinders are purpose made for racing, the brakes are tested and developed by the best and fastest motorcycle racers in the world.
以下是國外一些網站對這顆卡鉗的描述
Brembo - Radial Monobloc 4 Pad P34/4 Caliper - (X99C4)
Radial Monobloc 4 Pad P34/4 Caliper - 108mm Mounting Centres
Radial mount monobloc, 4 pad racing caliper. CNC machined from solid aluminium with dark gold hard anodised finish and red Brembo branding. Brembo X99C4 radial brake calipers are designed for use on narrow or wide track discs and are a direct replacement to standard brake calipers (must use correct spacer kit).
Radial mount monobloc, 4 pad racing caliper (108mm centres).
4 pot Titanium vented piston (O 34 mm) caliper design.
Caliper body is machined from solid aluminium, to the same specification as all Brembo racing calipers.
High temperature racing seals designed for the track and race.
Upper strengthening bridge.
Narrow pad path design allow these calipers to be used with standard fitment discs, HPK discs , trackday discs or narrow track race discs.
Quick release Titanium pad pins.
This is a true single piece brake caliper, using 4 pads per caliper gives higher initial bite, braking power and consistency. over 2 pad versions..
Brembo’s racing radial calipers fit directly to the bikes that have radial calipers fitted as standard.
Correct spacer kit required to fit, see below under ’Related Products’.
官方型錄的描述
只提到"鋁料CNC加工"
並無提到"鍛造"一詞
而在型錄上的其他產品
是有提到"鍛造"
但卻不是Racing等級的產品
[ 本文章最後由 大哥 於 2011-7-14 17:40 編輯 ] |
